Why Bow Bumpers are Important


Bow fenders have two primary purposes, to shield the watercraft from the anchor as well as protect it from any damage while mooring or berthing the boat. As the name implies, it is the bow of the watercraft these bumpers are built to protect. The amount of the bow that the fender protects will depend on the size of the fender. Since the bow is the most vulnerable part of the watercraft so it is vital that it is properly protected.


520612120_579.jpg

The bow fender may be left in position when cruising which helps it to protect the watercraft from any damage which could occur from the anchor swinging in the bow. The commonest type of bow fender is actually a V shape that has a bulbous part in the centre for taking in any damage, keeping the boat from harm. The fenders have three holes that attach them to the boat, two on the top and one in the middle. The rope which is passed through the centre is normally of a longer length and is attached to the mooring cleat. This permits the fender to be adjusted if necessary depending on the mooring situation. A choice of various colours is offered for the bumpers. Blue and white are the most popular options, but they can be found in burgundy and black. The colour that's picked will depend on the personal preference of the owner. In case more than one fender is required, which will likely be the case, exactly the same colour may be selected or they may pick a number of colours to liven up the appearance of the watercraft. This kind of design could work best on boats that provide rides to the public such as river ferry boats. The fenders are protected against UV damage so whichever colour is chosen, the boat owner can be certain the colours won't fade away.
There's a lot of quarter fenders that can be purchased listed here.


A horseshoe layout is also sometimes used for bow bumpers. This kind of design is inclined to have a nylon strap around the centre of the bumper and the central opening is located on this strap. This also enables the fender to get raised and dropped when necessary. Rather than merely being placed over the front of the motorboat, these bumpers tend to be fitted across the bow.


Bow fenders come in a variety of distinct colours. To a certain degree, bow bumpers are not as decorative as other kinds of fender and the choice of colour doesn't involve such consideration. Similar to other kinds of fender, blue and white are the most popular colours with black also being available.


Sailing schools find bow bumpers especially helpful as they protect the boat against any damage which may take place when students are first learning to guide the watercraft. Because of this, they are also widely used in sport centres or other locations where the sailing of the boat is performed by individuals who are comparatively inexperienced. Of course, it is not just novice sailors which may have any sort of accident; therefore wherever motorboats are sailed bow bumpers should be used.



Vessels that often berth at marinas also will make use of bow fenders. It is because the bow is usually the part of the boat which is moored in a marina. As the fenders are adjustable, the individual steering the watercraft will be able to berth at virtually any marina, no matter the height of the mooring content.


Bow bumpers, while not crucial, is definitely an essential part of your boating kit and ought to be a part of your armoury against any kind of unwanted knocks and scrapes. Getting bow bumpers on the motorboat may help you to avoid a pricey repair bill further down the line.

Facebook Twitter Pinterest Flickr Instagram LinkedIn share
online portfolio